GPS Base Station PCB/PCBA Design

Name: GPS Base Station PCB/PCBA Design

Designable layers: 1-32 layers

Minimum line width and line spacing: 3mil

Minimum laser aperture: 4mil

Minimum mechanical aperture: 8mil

Copper foil thickness: 18-175цm (standard: 18цm35цm70цm)

Peel strength: 1.25N/mm

Minimum punching hole diameter: single side: 0.9mm/35mil

Minimum hole diameter: 0.25mm/10mil

Aperture tolerance: ≤φ0.8mm±0.05mm

Hole tolerance: ±0.05mm

Hole wall copper thickness: double-sided/multi-layer: ≥2um/0.8mil

Hole resistance: double-sided/multi-layer: ≤300цΩ

Minimum line width: 0.127mm/5mil

Minimum pitch: 0.127mm/5mil

Screen printing color: black, white, red, green, etc.

Surface treatment: lead/lead-free tin spray, ENIG, silver, OSP

Service: Provide OEM service

Certificate: ISO9001.ROSH.UL

Inquiry Get instant quote

Product Details Data Sheet

What is Base Station GPS?

What is a base station? A base station is a GPS receiver that collects GPS measurements at a known location. Its main components are an antenna, a GPS receiver, and a device that records GPS data - usually a personal computer.

How does a base station work?

The base station connects the call to the fixed line network. Depending on the type of call, it will be directed to another mobile phone or landline phone. A base station consists of an antenna connected by a cable to an electronic (radio) device usually located in a room or "shelter".