What equipment is needed for SMT patch processing?
Welding process parameters: The selection and adjustment of welding process parameters will also aff...
Professional PCB manufacturing and assembly
Building 6, Zone 3, Yuekang Road,Bao'an District, Shenzhen, China
+86-13923401642Mon.-Sat.08:00-20:00
Cause analysis and countermeasure of material loss in SMT processing
2, the spring tension is insufficient, the suction nozzle and HOLD are not coordinated, resulting in...
How to choose PCBA manufacturerelectronic technology?
Secondly, excellent PCBA manufacturers need to have a complete quality management system to ensure p...
Three points method to shorten PCBA proofing time
In the whole PCBA proofing process, the whole process management is very important, and it is usuall...
SMT patch processing common professional terms to share
patch inspection: when or after the patch is completed, the quality inspection is carried out for wh...
PCBA processing seven-point operating rules
The operating steps of PCBA and components are reduced to a minimum to prevent dangers. In assembly ...
Adjustment elements of wave soldering process for SMT patch processing
In THT wave soldering, the preheating temperature should not only consider the activation temperatur...
The difference between solder paste net and red glue net for SMT patch processing
Solder paste net and red glue net in the material is also very different. Solder paste mesh is usual...
The difference between solder paste and red glue used in SMT processing
In addition to the above advantages and disadvantages, solder paste and red glue are also different ...
There are four types of reasons for poor tin penetration in SMT patch processing plants
The selection and control of process parameters is one of the important factors affecting the qualit...
Four common SMT processing processes
FeedFeeding refers to feeding the components prepared in the preceding sequence in accordance with f...
How to control solder paste in SMT processing plant?
Using outdated equipment and technology can result in too much or too little solder paste being appl...
Telegram
Just upload Gerber files, BOM files and design files, and the KINGFORD team will provide a complete quotation within 24h.