SMT screen printing template classification and manufacturing methods
Electroerosion formwork currently accounts for about 2~3% of the use. Its manufacturing process is additive. Unlike other processes, the formwork forming method is as follows.
Professional PCB manufacturing and assembly
Building 6, Zone 3, Yuekang Road,Bao'an District, Shenzhen, China
+86-13923401642Mon.-Sat.08:00-20:00
Electromagnetic compatibility design of PCB
For small power digital integrated circuit, choose 0.2-0.5mm line width. In the same PCB, the ground and power cables should be wider than the signal cables.
Design of electromagnetic compatibility based on PCB
Therefore, the interference source and propagation path of electromagnetic interference must be analyzed. Common electromagnetic interference in PCB design includes conduction interference, crosstalk interference and radiation interference.
Dynamic analysis of PCB components in avionics
At the same time, because the stiffness of the electronic housing is much greater than that of the PCB component, the finite element model imposes a fixed support constraint on the screw holes at four corners to simulate the screw connection between the P
The particularity of PCB design
Once the design data is transmitted to the PCB workshop in the form of ASCⅡ, the processor can smoothly implement process operations such as etching compensation, panel imaging, output drilling, wiring and photography.
Electromagnetic compatibility in printed circuit board (PCB) development techniques
Electromagnetic compatibility in the design of printed circuit board (PCB) involves many factors, the following mainly from three parts to be elaborated, the specific selection to integrate various factors.
Invisible micro short circuit
Counterpoint when hands take, put the board, strictly avoid board and board superimposed together, or board and counterpoint table friction, avoid scratching the board surface.
What are the applications of flexible printed boards?
Core plate fabrication → inspection → surface treatment → superimposed semi-curable sheet and RCC→ pressing → positioning of the pattern of the hole → etching the window of the hole →CO2 laser drilling → removal of protective film → metallization of the h
What are the basic components of a circuit board?
The semi-molten solder paste is placed on the circuit board by the steel mold, and then the SMD components are pasted on it, and it is welded on the circuit board by reflow welding
Electronic enterprise SMT SMT machine use precautions
When adjusting the width of the guide rail, pull out all PCB supporting thimbles. There should be no PCB at the entrance and exit ends to prevent damage to the guide rail. After adjusting the width of guide rail, adjust the width of guide rail of buffer t
Factors affecting etching fluid characteristics in PCB printed circuits
Therefore, this requires the designer in the circuit design, should first understand the feasibility of the process, as far as possible to achieve the entire board circuit graphic uniform distribution, wire thickness should be consistent as far as possibl
Application field of multi-layer circuit board
For high - level circuit board processing technology research literature, the industry is relatively few. This paper introduces material selection, laminated structure design, interlayer alignment, inner line production, pressing process, drilling process
Telegram
Just upload Gerber files, BOM files and design files, and the KINGFORD team will provide a complete quotation within 24h.