At the same time, because the stiffness of the electronic housing is much greater than that of the PCB component, the finite element model imposes a fixed support constraint on the screw holes at four corners to simulate the screw connection between the P
OSP membranes have been used in circuit boards for many years as organomaterials formed by the reaction of azole compounds (azole) with transition metal elements, such as copper and zinc.
Existing PCB data standards, such as IPC D350, generally favor a point-to-point exchange between two specific objects (design tool and design tool, design tool and manufacturing application).
Once the design data is transmitted to the PCB workshop in the form of ASCⅡ, the processor can smoothly implement process operations such as etching compensation, panel imaging, output drilling, wiring and photography.
PCB design/fabrication data was generated by electronic designers using EDA tools, including fabrication of PCBS such as light painting, assembly and test. PCB data format standard is a descriptive language to standardize PCB layout design, which is used
Filtering refers to the classification of various signals by frequency characteristics and the control of their direction. Commonly used are a variety of low-pass filter, high-pass filter, bandpass filter. The low-pass filter is used on the connected AC p
Electromagnetic compatibility in the design of printed circuit board (PCB) involves many factors, the following mainly from three parts to be elaborated, the specific selection to integrate various factors.
the exposure machine Myra film due to use time is longer, there is scratch phenomenon on the film surface, scratch accumulation dust form black or opaque "small lines", in line graphics exposure due to black or opaque "small lines" sha...
The surface packaging technology is analyzed and studied for assembling the circuit board. And then we put it together and we make a finished product. That is to say printed circuit board blank after the patch
Therefore, copper can be used as the base of electrodeposition of many metals, and copper plating plays an important role in the production process of printed board.
In the design of PCB boards for gigabit devices, a good signal integrity design requires the engineer to consider all aspects of the device, transmission line interconnection scheme, power distribution, and EMC.
Therefore, this requires the designer in the circuit design, should first understand the feasibility of the process, as far as possible to achieve the entire board circuit graphic uniform distribution, wire thickness should be consistent as far as possibl
Telegram