The layout should be noted
The key of RF circuit PCB design is how to reduce the radiation ability and how to improve the anti-...
Professional PCB manufacturing and assembly
Building 6, Zone 3, Yuekang Road,Bao'an District, Shenzhen, China
+86-13923401642Mon.-Sat.08:00-20:00
Rf circuit PCB design
According to experience, the effect of RF circuit not only depends on the performance of the RF circ...
PCB design of the core problem solution
these problems can be avoided. Because the design of the circuit board will vary according to differ...
Is there a difference between gold plating and silver plating on PCB?
Even if the oxidation after a long time of use will almost only occur in the insertion and removal o...
Signal integrity and design of PCBS
As the growth and shrinkage stability of soft plate material is poor, the production of soft plate a...
The occurrence of cavity in PCB hole wall coating and its countermeasures
There are many factors causing the coating cavity, the most common is PTH coating cavity, by control...
High speed PCB design skills
The main signal line is best concentrated in the center of the PCB board.The clock generator circuit...
Rigid deflection of printed circuit board to drill dirt and dent technology
whether it is dry method or wet method, if suitable method is selected according to the characterist...
Plasma surface pretreatment in PCB board manufacturing process
In addition, before the solder resistance film coating, the printed circuit board surface is treated...
The difference between PCB gold sinking process and gold plating process
Now the production of gold plate is rarely, in the actual trial process, 90% of the gold plate can b...
PCB design always has a few impedance can not be continuous place, how to do?
The parasitic capacitance through the hole can cause the signal rise time to be prolonged and the tr...
PCB conduction hole plugging process and reasons detailed
It is difficult to use this process to control the production, so process engineers must adopt speci...
Telegram
Just upload Gerber files, BOM files and design files, and the KINGFORD team will provide a complete quotation within 24h.