Introduction to Consumer Electronics PCBAAfter the PCBA board completes the front-end welding process, it is still impossible to ensure that the PCBA board is intact. In order to ensure that the products shipped to customers are intact and improve custome
Energy storage battery PCBA management system1. Detailed technical planThe battery energy storage system consists of an energy storage battery, a master controller unit (BAMS), a single battery management unit (BMU), and a battery pack control and managem
With the continuous progress of human requirements for living environment, the environmental problems involved in the production process of PCB are particularly prominent.
The process does not require specialized technical personnel to operate, operators only need to go through simple training, and in the operation, only need to pay attention to the general chemical reagent operation safety can be. In terms of environmental
In the tide of domestic smart city construction, strengthening the localization of PCB copy board will strongly support the wisdom of the development of all walks of life.
IC1 is the signal output end, IC2 is the signal input end (for the simplified PCB model, it is assumed that the receiving end contains the underlying resistance) and the third layer is the stratum.
Through hole design rules for PCB1. Welded(1) Plated through holes (PLTH) (including through holes)(2) Non-plated through holes (NPTH)2. Not welded(1) Through-holes to be welded3. Non-plated through holes (NPTH) with and without padsThe designer must firs
PCB industry chain1. Introduction to PCBPrinted circuit board (referred to as PCB) is a finished board with insulating substrate and conductor as the material, designed and made of printed circuit, printed component or a combination of the two according t
Suitable PCBA patch processing manufacturers can not only bring high quality costs for enterprises, but also bring cost-effective returns. Therefore, in the selection of PCBA patch processing manufacturers, electronics factories are very careful. So, how
n the process of PCB design, wiring generally has three levels: the first is the cloth, which is the most basic entry requirements of PCB design; The second is to meet the electrical performance, which is to measure whether a PCB board qualified standard,
The workshop supervisor of SMT patch processing and production shall reasonably arrange the workshop plan according to the weekly and monthly plan of PMC department and the material supply situation, and arrange the elongation of each line body and techni
High-end equipment can stick precision shaped parts, BGA, QFN, 0201 materials. Can also template patch, loose material hand
Telegram
