There will be engineering review and approval of your information, if there is a problem with the first time to combine with you! In order not to delay your time, the combination of the form must be accurate, if not combined, we will stop production!
Width and spacing of printed wire are important design parameters, which affect not only the electrical performance and electromagnetic compatibility of PCB, but also the manufacturability and reliability of PCB.
he computer has the computer circuit board, the machine has the machine circuit board, a lot of electronic products are required to be equipped with the corresponding circuit board.
Several parts of the circuit board are mainly: 1. Bare copper plate: 2. Gold plate: 3. Spray tin circuit board: 4. OSP process board is also called organic welding film in SMT factory.
Three anti paint has satisfactory high and low temperature resistance; It cures into a transparent film that tries to protect the circuit from damage in such conditions as chemicals, shock, moisture, salt spray, moisture and high temperatures.
If the contact or line on the PCB circuit board needs to contact with the parts over and over again, with the passage of the product office hours, the appearance of the metal will reveal a certain wear, so the contact is not good.
PCB proofing refers to the trial production of PCB before mass production. After the electronic engineer presets the circuit and completes the PCB Layout, he carries out the process of small batch trial production to the factory, that is, PCB proofing.
Specific office process: incoming materials → inspection data → visual inspection → conforming to standards →FQA sampling → conforming to standards → packaging → not suitable for standards → disposal → investigation.
PCB board is a closed electronic device, is the electronic component of the support body, is the electronic component of the electrical joint carrier. HDI board is a high density interconnected circuit board.
Not paying attention to the packaging of products can bring immeasurable benefits.
The first step to enter the PCB circuit board system is to set the PCB preset background, including setting the grid volume and type, cursor type, version layer reference, wiring reference, etc.
The most fundamental difference between gold plate and gold plate is that gold is hard gold (wear-resistant), gold is soft gold (not wear-resistant).
Telegram