Professional PCB manufacturing and assembly
Building 6, Zone 3, Yuekang Road,Bao'an District, Shenzhen, China
+86-13923401642Mon.-Sat.08:00-20:00
Engineering Technology

Engineering Technology

PCB design always has a few impedance can not be continuous place, how to do?
30Mar
Kim 0 Comments

PCB design always has a few impedance can not be continuous place, how to do?

The parasitic capacitance through the hole can cause the signal rise time to be prolonged and the transmission speed to be slowed down, thus deteriorating the signal quality.

PCB conduction hole plugging process and reasons detailed
30Mar
Kim 0 Comments

PCB conduction hole plugging process and reasons detailed

It is difficult to use this process to control the production, so process engineers must adopt special flow and parameters to ensure the quality of the plug hole.

High speed backplane design considerations and analysis of innovative solutions
30Mar
Kim 0 Comments

High speed backplane design considerations and analysis of innovative solutions

Chip products with innovative signal-tuning technologies, such as high-speed backplane interface solutions, can effectively solve these system-level challenges, enabling system vendors to deliver high-performance and scalable systems to their customers, w

How to prevent PCB circuit board from bending and warping in back welding furnace
30Mar
Kim 0 Comments

How to prevent PCB circuit board from bending and warping in back welding furnace

The advantage of performing reception equalization in standalone devices is that it provides optimal wiring advantage and design flexibility.

The following is a description of the four types of 6-ply structure listed in Table 2
30Mar
Kim 0 Comments

The following is a description of the four types of 6-ply structure listed in Table 2

In fact, the above principles need to be applied flexibly in the laminated design. Sometimes not all principles can be met at the same time or all principles can be applied optimally.

PCB circuit board multilayer laminated design
30Mar
Kim 0 Comments

PCB circuit board multilayer laminated design

The current approach is to increase the distance between the two signal layers and make the lines of the two layers as vertical as possible to avoid signal crosstalk between layers.

Why the combination of soft and hard design technology
30Mar
Kim 0 Comments

Why the combination of soft and hard design technology

With the combination of soft and hard technology, designers can interconnect multiple PCBS in a single package without the need for connectors, wires and cables.

Hd understand the basic architecture of tight HDI board PCB
30Mar
Kim 0 Comments

Hd understand the basic architecture of tight HDI board PCB

The inner laser hole needs to be electroplated and filled, and then the outer laser hole is made. The price is more expensive than the error hole.

PCB circuit board is good or bad to identify the method
30Mar
Kim 0 Comments

PCB circuit board is good or bad to identify the method

Shenzhen Princetron Circuit, as an innovative one-stop high-end electronic manufacturing services expert, will be committed to bring you more convenient experience, more intimate service and continuous innovation and progress!

Characteristic impedance problem of PCB technology in high-speed design
30Mar
Kim 0 Comments

Characteristic impedance problem of PCB technology in high-speed design

This simple statement connects the common sense of capacitance with the newly discovered theory of characteristic impedance.

How is the surface of the circuit board foaming caused?
30Mar
Kim 0 Comments

How is the surface of the circuit board foaming caused?

Circuit board bubbling​ is actually the problem of poor binding force on the board, and then by extension, the surface quality of the board, which contains two aspects,

pcb organic coating
30Mar
Kim 0 Comments

pcb organic coating

the traditional aluminum sheet plugging process is changed, and the plate surface welding and plugging are completed with white mesh. Stable production and reliable quality.

Just upload Gerber files, BOM files and design files, and the KINGFORD team will provide a complete quotation within 24h.